Press the ENTER key after you type each command. To do this, type the following commands at a command prompt. Stop the BITS, Cryptographic, MSI Installer and the Windows Update Services. I have not tried any other brand to see if the same Version 16299 hang occurs. Press Windows key + X and click on Command Prompt (Admin). I think many Store purchased systems may have this card installed.ĭisclaimer: I am not claiming there is any defect with the Anatel card. If it is an Anatel Brand RT3090PCIE, replace it with a different brand or remove it and hook up to the internet with a Cat5 or Cat6 cable. If you are getting the 'hang at 82%' error, check your internal WiFi card. Prior to this change the update failed at least 10 times as I searched the Internet for a solution and changed components in my system such as Memory and Hard Drives. Pull the WiFI card and the update goes smoothly. Can you bring here build engineer or kernel engineer Once a year, I had to delete all files on Windows 10 and install it again. It seems like the update is really stuck due to a some kind of a bug. However, Version 16299 Upgrade does NOT want this WiFi card installed. This is not due to the model or compatibility. Many upgrades to Windows have been done on the system without any problem. I connect to the Internet via Cat6 cable so never used the WIFi feature. Ive tried rebooting my system to see if the updates will finish installing but then it goes right back to 45 and stays there. Windows update has been stuck at 45 for the last 3 hours and usually my updates go pretty quick. This card has been in my system for four years and was a factory installed Component part of the Gateway DX4860. So far no real issues to report running Windows 10 I really love it but here is my issue. It is a 'hardware' problem caused by the WI FI plug-in card made by Anatel. I found the problem on my system and suspect many other 'store bought' computers have this same problem.

Windows 10 upgrade stuck at reset pc